An A4 scrapbook page for a New York City trip, ready to print, with a 5 cm scale bar along the bottom edge
An A4 page as exported from YearPics. The 5 cm bar at the bottom lets you check the print came out at actual size.

Print a scrapbook page from an iPhone

  1. Match the page to the paper. Make the page at the size you will print: 4×6, 5×7, 8×10, US Letter, A4 or 12×12. Resizing later crops or adds white bars.
  2. Export a print-quality file. Save as a PDF or a PNG at about 300 pixels per inch. A 1080-pixel image is fine for a phone screen but only prints sharply at about 3.5 inches wide.
  3. Print at home with AirPrint. Open the file, tap Share, then Print. Pick your printer, set the paper size, and turn off any "fit" or "scale" option if your printer shows one, so the page prints at actual size.
  4. Or send it to a photo lab. Upload the PNG or PDF to a photo lab’s website or app and order the matching print size. Labs are the usual route for 12×12 and for glossy photo paper.
  5. Check the size. Measure something of known size on the print, such as a scale bar, to confirm nothing was scaled before you print the whole set.

Pixels you need for each size

At 300 pixels per inch, the usual target for photo prints:

Print sizePixels needed
4×6 in1200 × 1800
5×7 in1500 × 2100
8×10 in2400 × 3000
US Letter (8.5×11 in)2550 × 3300
A4 (210×297 mm)2480 × 3508
12×12 in3600 × 3600

Below about 200 pixels per inch you will start to see soft edges on text and fine lines.

Printing at home

AirPrint is built into iOS, and most current printers from the big brands support it. A few things make home prints look better:

  • Set the paper type in the printer options when you can (photo paper vs plain paper changes how much ink is used).
  • Print a test on plain paper first to check the size and margins.
  • Borderless printing depends on your printer. If yours can’t print to the edge, design pages with a margin of about a quarter inch so nothing important is cut.
  • Small photo printers that print 4×6 are handy for individual photos and pieces you cut out, not for full pages.

Printing through a lab

Photo labs and print shops accept PNG, JPEG and often PDF uploads. Pick the size that matches your file exactly; if the lab offers “crop to fit”, check the preview so the edges of your page aren’t trimmed. Lab offerings and prices change, so check the sizes your local lab supports before you design at 12×12.

After printing

Let inkjet prints dry for a few hours before gluing or putting them in sleeves. Use photo-safe adhesive, and add tickets and handwriting last.

questions

Can I print a 12x12 scrapbook page at home?

Only with a wide-format printer that takes paper at least 12 inches wide (13×19 is the common size). Most home printers handle Letter or A4 at most, so print 12×12 pages through a photo lab or print shop, or make your pages at 8×10 or Letter instead.

Why does my printed page look blurry?

The file has too few pixels for the paper size. Export at about 300 pixels per inch for the print size, or print smaller.

What paper should I use for scrapbook pages?

Use acid-free paper so pages don’t yellow. Matte photo paper hides fingerprints and is easy to write on; glossy looks brighter but shows glare in album sleeves.

Should I print the whole page or individual photos?

Printing the whole page is faster and keeps the layout exact. Printing photos and pieces separately lets you cut them out and build a layered, handmade page. YearPics can do both: a full page, and a separate sheet of decorations to cut out.